Product Category

200mm EC-AC Duct Fan PQ3N200B2E-TZ0

PBM FOCUS ON EC FAN ONLY. Certificate: CE,UL,ROHS; Supply Ability: 100,000 pcs per year; MOQ: 1~100 pcs based on EXW price; 100 pcs above based on FOB price.

Technical Description

Curve and Draw

Certificate

Application Scopes

Packing Details

Due to lengthy ducts and several bends, industrial plant smoke and exhaust emissions, as well as those from subterranean parking garages, sometimes have inadequate ventilation. With its incredibly high static pressure of 1000 Pa, this 200mm EC duct fan can overcome fire dampers, vertical air ducts, and 30-meter ducts to provide enough suction at far-off air outputs. It can power eight parking garage exhaust outlets at once or finish the air exchange of a 500⁡ factory in 15 minutes thanks to its enormous air volume of 1180 m³/h. The industrial fan uses 170W of power, so it can run all the time without stopping. This industrial fan is also 90% more energy-efficient than other industrial fans. The fan has a steel impeller that does not corrode easily. It also has IP55 protection to keep dust and water splashes out. The industrial fan is really good at saving energy. Stall protection and 0–10V speed control are supported. This 200mm inline fan is a perfect power source for long-distance exhaust systems and may be used in machine shops, paint booths, and subterranean parking lots.

General Characters

1-1	Rated Voltage	230 VAC
1-2	Frequency	50/60 Hz
1-3	Operating Voltage	184~270 VAC
1-4	Rated Speed	2700 RPM
1-5	Input Current	1.1 A
1-6	Input Power	170 W
1-7	Air Flow	694.43 CFM / 1180 M³/H
1-8	Static Pressure	4.00 inH₂O / 1000 Pa
1-9	Acoustical Noise	71 dB(A)
1-10	Life Expectancy	50,000 Hours (L10) At 40℃ room, humidity 15%~65%RH.
1-11	Insulation Class	Class B
1-13	Motor Protection	Locked rotor protection Polarity protection Automatic restart capability
1-14	Speed Control	Control input 0~10VDC / PWM
1-15	Protection Type	IP55
1-17	Signal Output	FG (Frequency Generator)

Mechanical Characters

2-1	Dimension	386 mm X 396mm X 224mm (see dimension drawing)
2-2	Material of Impeller	PA66+25%GF
2-3	Number of Blades	7
2-4	Bearing System	NMB ball bearing
2-5	Lead Wire	AC (AWG20#), DC (AWG22 #)